Coatings for Sheet Materials

Depending on the application area, sheet materials require very different coating systems. Therefore, the surfaces for kitchen worktops should have good chemical and mechanical resistance, but still be suitable for direct contact with foodstuffs. Our Polyx® Systems allow manufacturers to produce surfaces according to their needs. Regardless of whether clear or coloured, our systems provide various solutions tailored to your requirements.

Sapwood Stain

> Waterborne – physical curing
> Stains sapwood to match it to the rest of the wood
> For example, on Oak and Walnut
> Requires further treatment
> Solvent-free
> Only partial coating possible

Pigment Stain

> Waterborne – physical curing
> Intense colours; two-tone effects
> Transparent
> Requires further treatment
> Solvent-free
> Approx. 20-40 g/m²

Primer

> Waterborne – physical curing
> For a raw wood look
> Transparent
> Requires further treatment
> Solvent-free
> Approx. 20-80 g/m²

Spray-Polyx^®-Oil

> Industrial hardwax-oil for oxidative curing
> For manual or machine appliations
> Opaque, transparent or clear, various sheens
> Pre-treated or factory-finished surfaces
> 1 or 2 coats in the same system or a system consisting of primer and Top Coat
> No hidden solvents (SVOCs)
> Approx. 40-80 g/m²

Oxi-Polyx^®-Oil

> Industrial hardwax-oil for oxidative curing
> Surface with a natural look and feel
> Transparent or clear, various sheens
> Pre-treated or factory-finished surfaces
> 1 or 2 coats in the same system or a system consisting of primer and Top Coat
> No hidden solvents (SVOCs)
> Approx. 15-40 g/m²

UV-Polyx^®-Oil

> Industrial hardwax-oil, curing with UV lamps
> High resistance with low application amounts
> Transparent or clear, various sheens
> Factory-finished surfaces
> One system consisting of primer and Top Coat
> 100% curing, no solvents
> Approx. 15-20 g/m²

Hybrid-Polyx^®-Oil

> Industrial hardwax-oil, curing with UV lamps
> Extremely matt natural surfaces
> Clear, various sheens
> Factory-finished surfaces
> Top Coat with Oxi-Polyx^®-Oil or UV-Polyx^®-Oil
> No hidden solvents (SVOCs)
> Approx. 15-20 g/m²