Beton-Öl
colours
Makes concrete surfaces and unglazed tiles more stain-resistant
Osmo Beton-Öl is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windowsills and kitchen worktops.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0,75 | 11500115 | |
| 2,50 | 11500116 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
Finished surface in 2 days, 2 coats
- With Osmo Flächenstreicher, Fussbodenstreichbürste, Öl-Farben Auftrags-Vlies or Mikrofaserwalze, apply very thinly and spread well.
- Remove excess with a pad or lint-free cloth
- Drying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
- Apply the second coat also very thin. (When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.)
- Drying time approx. 8-10 hours; see point 3.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
WHAT WILL THE COATING LOOK LIKE?
Do you want to try our coatings out for yourself and see the results with your own eyes? Then order up to 5 sample sachets free of charge.
